|
CryLastic is an acrylic polymer emulsion, which forms an elastomeric waterproof membrane possessing outstanding adhesion to various substrates. CryLastic is a flexible “breathing” membrane, allowing minimal amounts of moisture vapor from the building interior to escape through the coating while remaining impervious to liquid water penetration from the exterior.
BENEFITS:
- One-component material.
- Solvent-free.
- High resin content.
- No protective top coats required.
- Elastomeric.
- Very good weatherability.
- Contains no asbestos.
IRO Ply APP MB Adhesive is a high performance, high solids, asphalt based, polymer modified adhesive that contains a unique blend of specially formulated components that enhance elasticity, adhesion and waterproofing characteristics of the adhesive. Made with a high concentration of rubber and reinforcing fibers that result in an easy applying, quick bonding, and tough yet flexible adhesive. Specially designed for applying APP modified bitumen rolled roofing products to various roof surfaces, base and/or interply sheets.
BENEFITS:
- Cold Applied.
- Resists bonding failures associated with thermal movement during installation.
- Superior durability and heat aging characteristics.
- No running or sagging at elevated roof temperatures.
Pars Alt SBS MB Adhesive is made with a high concentration of polymer and reinforcing fibers that produces an easy-to-apply cold process adhesive for use when applying SBS modified bitumen rolled roofing products to various roof surfaces, base and/or interply roll products.
BENEFITS:
- Cold Applied.
- Resists bonding failures associated with thermal movement during installation.
- Superior durability and heat aging characteristics.
- No running or sagging at elevated roof temperatures.
SR Dampproofer is a low-solids, clear, waterborne siloxane water repellant product designed to penetrate into exterior, above-grade cement block, brick, stone, stucco, concrete and other porous masonry surfaces to form a barrier against water intrusion. SR Dampproofer goes on milky in color, but dries clear so that the surface appearance and texture are not altered.
BENEFITS:
- A single application inhibits efflorescence and the effects of weathering, such as spalling.
- Permits the treated masonry surface to breathe.
- Provides resistance against atmospheric contaminates.
- SR Dampproofer is a water-based product which is odorless and non-toxic.
- Inhibits freeze/thaw cycle damage.
SR Insulation Adhesive is a two-component modified coal tar epoxy designed exclusively for adhering a wide range of approved insulating materials to approved deck systems. This “state-of-the-art” technology eliminates the need for cumbersome and often hard to install roof fasteners.
BENEFITS:
- Will not shrink or crack 100% solids.
- Adheres to most common deck types.
- No mechanical fasteners needed.
- Allows retention of substrate integrity.
SR Sun-Gard Plus Aluminum Roof Coating is a premium blend of refined asphalt bitumen, solvent, high-quality leafing aluminum pigments and reinforcing fibers for additional strength and durability. These leafing aluminum pigments cure to form overlapping layers which when cured turn into a tough reflective barrier.
BENEFITS:
- Has excellent adhesion properties when applied to properly prepared substrates.
- Product contains 25% more aluminum paste than required by ASTM standards.
- A brilliant reflective surface slows down the roof aging process by reflecting damaging ultra-violet light and extends the service life of the roof.
- Reduces costly energy consumption by helping to maintain the desired interior climate by reflecting most of the solar energy away for the roofs surface.
- Complies with ASTM D-2824.
SuperiorFlex® Gold MB is a superior blend of refined asphalts, selected solvents, tackifying resins and SBS polymers blended in precise proportions to allow for ease of application, very good adhesive properties and exceptional system performance.
BENEFITS:
- Resists bond failures associated with thermal shock and movement.
- Cold applied.
- Unique compound cures to a strong rubberized adhesive.
- Eliminates running or sagging during periods of elevated temperatures.
- Non-asbestos formula.
SuperiorFlex® Seal Max is a “state of the art” two-component waterproofing and adhesive compound. SuperiorFlex® Seal Max’s superior tensile strength and outstanding elongation combined with specified, high performance SR Base and ply sheets, create a unique and revolutionary waterproof membrane. SuperiorFlex® Seal Max is the strongest of our exceptional line of adhesive and waterproofing materials.
BENEFITS:
- Excellent resistance to ponding conditions.
- Provides exceptional resistance to thermal shock and movement.
- Apply to either flat or sloped surfaces.
- Unique mixture cures to a strong rubberized waterproof membrane.
- Classified by Underwriters laboratories, Inc.® as to an external fire exposure only.
- Approved by Factory Mutual Research Corporation® Standard 4470, Class I (A)-90.
- Approved by the Miami Dade County Building Code Compliance Department and Building Code Committee.
- Product designed to comply with the 2004 Florida Building Code, with 2006 Supplements, FL8077.
SuperiorFlex® Seal MG Plus is a thermoplastic, cold-applied rubber mastic designed for use as an interply adhesive for waterproofing a variety of structural surfaces.
BENEFITS:
- Cures to a strong rubber-like material.
- Designed to accommodate normal thermal movement.
- Contains no asbestos.
SuperiorFlex® Seal O MG Plus is a revolutionary, polymer-enriched membrane and waterproofing material. Superior Flex® Seal O MG Plus represents a true technological breakthrough in exterior waterproofing. An alternative solution for re-roofing or restoration for odor-sensitive facilities.
BENEFITS:
- Excellent weathering characteristics.
- May be applied to smooth or sloped roofs.
- Uses environmentally friendly extracts from orange peels to replace conventional roofing odors.
- Tested independently per ASTM G-154 criteria for long-term weathering.
SuperiorFlex® Seal O Plus is a revolutionary polymer-enriched thermoplastic coating and mastic. SuperiorFlex® Seal O Plus combines “state-of-the-art” technology with a proprietary formulation to create an elastomeric waterproof membrane that utilizes a unique blend of solvents to provide a pleasant orange scent when installing the product in odor sensitive areas.
BENEFITS:
- Excellent resistance to ponding.
- Resists bond failure due to thermal shock factors.
- May be applied to flat and sloped surfaces.
- Uses safe, pleasantly scented extracts from orange peels to replace the conventional smell of coat tar and asphalt roofing.
SuperiorFlex® Seal Plus utilizes new, innovative technology to develop the most advanced polymer-enriched, fluid-applied membrane and waterproofing material. This state of the art technology, combined with our proprietary formulation, creates a tough elastomeric waterproofing material that exceeds the performance potential of most coal tar base and butyl compounds.
BENEFITS:
- Excellent resistance to ponding water.
- Resists bonding failures associated with thermal movement.
- May be applied to flat and sloped surfaces.
- No running or sagging at elevated roof temperatures.
Wite Brite® AS HS Coating is a high quality rubber formula which provides a white, durable elastomeric film over a variety of surfaces.
BENEFITS:
- Cold applied by brush or roller.
- Cures to a tough, protective barrier.
- Resists fatigue failure caused by thermal movement.
- Long-term performance.
- Asbestos free formula.
Wite Brite® Elastomeric Coating is a 100% acrylic water–based VOC compliant reflective coating fortified with titanium dioxide. This high quality white elastomeric, weather resistant coating may be applied over most smooth or mineral surface asphalt roof systems and many other commercial roof surfaces. Consult with your SR Products representative for specific information.
BENEFITS:
- Very good reflectivity.
- Resists fatigue failures associated with normal thermal expansion and contraction, providing long-term protection and flexibility.
- Non asbestos formula.
- High percentage of polymer when compared to other similar materials.
- Ready to apply.
Wite Brite® Skylight Rejuvenator is a performance enhancing water-base coating utilizing a blend of acrylic polymers. This highquality formula provides an elastomeric film over all types of aged skylights.
BENEFITS:
- Cold applied by brush, roller or spray equipment.
- Cures to a tough protective film.
- Secures surface integrity of skylight panes while maintaining light transferability.
- Contains no asbestos.
- Ready to apply.
Wite Brite® UC Base Coat is a high performance elastomeric polyurethane base film coating. It is not intended for use as a top surface coating. This product is a single component, liquid-applied, moisture-cured polyurethane.
BENEFITS:
- Provides superb adhesion to a variety of substrates.
- Offers high elongation and tensile.
- Excellent waterproofing characteristics.
- Available in a brushable version for vertical surfaces.
Wite Brite® UC Finish Coat White is a reflective high performance elastomeric polyurethane coating. This product is a liquid-applied, single component, moisture-cured polyurethane coating.
BENEFITS:
- Superb adhesion to many substrates.
- Provides a working balance of high elongation and tensile.
- Tough and durable waterproofing.
| 
