|
IRO PLY 180FR APP is a 170 mils (4.3 mm) thick fire-resistant, granule surfaced, premium APP (Atactic Polypropylene) cold adhesive applied/hot-air weld membrane. Manufactured with a polyester mat that is saturated and coated with premium quality, nonblown asphaltic bitumen and APP resins for a durable, heat resistant, flexible and easily maintainable membrane. The bottom surface of the sheet is lightly sanded to enable the membrane to be applied with cold applied IRO PLY APP MB Adhesive with hotair heat welded seams or a completely heat weld application.
BENEFITS:
- Excellent UV resistance.
- Reinforced with a polyester reinforcement for added dimensional stability.
- Contains no asbestos.
- Membrane application is either heat welded or cold applied with heat welded seams.
IRO PLY 180S APP is a smooth surfaced, 150 mils (3.8 mm) thick smooth surfaced, premium APP (Atactic Polypropylene) cold adhesive applied/hot-air weld membrane. Manufactured with a polyester reinforcement that is saturated and coated with premium quality, non-blown asphaltic bitumen and APP resins for a durable, heat resistant, flexible and easily maintainable membrane. The top and the bottom surfaces of the sheet are lightly talced to enable the membrane to be applied with IRO Ply APP MB Adhesive with hot-air heat welded seams. It is designed for use as a base, interply or cap membrane in cold applied APP modified bitumen roof systems.
BENEFITS:
- Weather resistant for long-term protection.
- Contains no asbestos.
- Meets ASTM D 6222 Type I Grade S requirements
IRO PLY Base APP is a smooth surfaced, 94 mils (2.4 mm) thick smooth surfaced, premium APP (Atactic Polypropylene) cold adhesive applied/hot-air weld membrane. Manufactured with a fiberglass mat that is saturated and coated with premium quality, non-blown asphaltic bitumen and APP resins for a durable, heat resistant, flexible and easily maintainable membrane. The top and bottom surfaces of the sheet are lightly sanded to enable the membrane to be applied with cold applied IRO PLY APP MB Adhesive with hot-air heat welded seams or a completely heat weld application.
BENEFITS:
- Weather resistant for long-term protection.
- Contains no asbestos.
- Meets ASTM D 6509 requirements
IRO PLY MA-4 Premium FR is a 170 mils (4.3 mm) thick surfacing membrane formulated with high quality asphalt, modified with atactic polypropylene (APP) resins. Reinforced with a nonwoven polyester scrim, IRO Ply MA-4 Premium FR exhibits exceptional dimensional stability. IRO PLY MA-4 Premium FR is surfaced with white reflective granules for UV protection, reflectivity and aesthetic value.
BENEFITS:
- Excellent UV resistance.
- Reinforced with a polyester scrim for added dimensional stability.
- Contains no asbestos.
- Meets or exceeds ASTM D 6222, Type I, Grade G.
IRO PLY MA-4 is a 157 mils (4 mm) thick surfacing membrane formulated with high quality asphalt, modified with atactic polypropylene (APP) resins. Reinforced with nonwoven polyester, IRO Ply MA-4 exhibits exceptional dimensional stability and is surfaced with white reflective granules for UV protection, reflectivity and aesthetic value.
BENEFITS:
- Excellent UV resistance.
- Reinforced with a polyester scrim for added dimensional stability.
- Contains no asbestos.
IRO PLY SA-4 is a smooth surfaced, 140 mils (3.5 mm) thick modified bitumen membrane formulated with high quality asphalt, modified with atactic polypropylene (APP) resins. Reinforced with a nonwoven polyester scrim.
BENEFITS:
- Weather resistant for long-term protection.
- Contains no asbestos.
IRO PLY X4FR APP is a 177 mils (4.5 mm) thick fire-resistant, granule surfaced, premium APP (Atactic Polypropylene) cold adhesive applied/hot-air weld membrane. Manufactured with a heavyweight polyester composite and fiberglass mat that is saturated and coated with premium quality, non-blown asphaltic bitumen and APP resins for a durable, heat resistant, flexible and easily maintainable membrane. The bottom surface of the sheet is lightly sanded to enable the membrane to be applied with IRO Ply APP MB Adhesive with hot-air heat welded seams. It is designed for use as a cap membrane in cold applied APP modified bitumen roof systems.
BENEFITS:
- Weather resistant for long-term protection.
- Contains no asbestos.
- Meets ASTM D 6223 Type II Grade G requirements
IRO PLY X4S APP is a smooth surfaced, 160 mils (4.0 mm) thick premium APP (Atactic Polypropylene) cold adhesive applied/hot-air weld membrane. Manufactured with a heavyweight polyester composite and fiberglass mat that is saturated and coated with premium quality, non-blown asphaltic bitumen and APP resins for a durable, heat resistant, flexible and easily maintainable membrane. The top and the bottom surfaces of the sheet are lightly talced to enable the membrane to be applied with IRO Ply APP MB Adhesive with hot-air heat welded seams. It is designed for use as a base, interply or cap membrane in cold applied APP modified bitumen roof systems.
BENEFITS:
- Weather resistant for long-term protection.
- Contains no asbestos.
- Meets ASTM D 6223 Type II Grade S requirements
PARAPLY Polyester Base Sheet is a uniquely designed modified, asphalt-coated, polyester roofing sheet. Modifiers provide heat stability characteristics, and are used in applications requiring the highest levels of performance. PARAPLY Polyester Base Sheet provides excellent elongation and tensile properties, as well as superior characteristic when subjected to stresses.
BENEFITS:
- Utilizes a roofing-dedicated asphalt to ensure premium roof system performance and durability.
- May be applied either by hot or cold adhesive.
Pars Alt 190 FR GR is a 170 mils (4.3 mm) thick membrane, formulated with high quality asphalt, which is modified with styrenebutadiene-styrene (SBS) polymers. Reinforced with a core of nonwoven polyester, Pars Alt 190 FR GR is manufactured with white granules for surface protection, reflectivity and aesthetic value.
BENEFITS:
- May be applied by either hot-mopping with asphalt or with cold-application adhesives.
- Weather-resistant.
- Good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6164, Type I, Grade (G) requirements.
- Contains no asbestos.
Pars Alt 190 FR TG SBS is a fire-rated, 4.0 mm thick, polyester reinforced, styrene-butadiene-styrene (SBS) modified bitumen cap sheet with a granule top surface and a polypropylene burn-off film underside for proper application. This sheet is designed to be applied using torch welding methods.
BENEFITS:
- May be applied by either hot air or torch welding methods.
- Weather-resistant for long-term protection.
- Very good cold weather performance.
- Exceeds ASTM D 6164, Type I, Grade (G) requirements.
Pars Alt 190 S SBS is a 120 mils (3 mm) thick base sheet and formulated with high quality asphalt, which is modified with styrenebutadiene-styrene (SBS) block copolymers. This product is reinforced with a core of nonwoven, high strength polyester.
BENEFITS:
- Applied by conventional methods.
- Weather-resistant.
- Good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6164, Type I, Grade (S) requirements.
- Contains no asbestos.
- UL listed ASTM E 108
Pars Alt 250 S SBS is 120 mils (3 mm) thick base sheet and formulated with high quality asphalt, which is modified with styrenebutadiene-styrene (SBS) block copolymers. This product is reinforced with a 250 gram core of nonwoven, high strength polyester.
BENEFITS:
- Applied by conventional methods.
- Weather-resistant.
- Good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6164, Type II, Grade (S) requirements.
- Contains no asbestos.
Pars Alt 250FR SBS is a 177 mils (4.5 mm) thick, fire-rated surfacing membrane formulated with high quality asphalt, which is modified with styrene-butadiene-styrene (SBS) copolymers. Reinforced with a core of 250 g/m2 nonwoven polyester. Pars Alt 250FR SBS is manufactured with white granules for surface protection and reflectivity.
BENEFITS:
- May be applied by hot-mopping with asphalt adhesives.
- Weather-resistant for long-term performance.
- Very good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6164, Type II, Grade (G) requirements.
SR Glass Base Felt is a high quality, 28 lb coated, fiberglass base sheet designed for use to construct both hot and cold-applied, high performance roof assemblies. SR Glass Base Felt utilizes an asphalt coating in combination with premium grade fiberglass reinforcements to produce a base sheet suitable for use under extreme conditions.
BENEFITS:
- Utilizes a roofing-dedicated asphalt to ensure premium roof system performance and durability.
- May be nailed using accepted industry procedures for base sheet application.
- Contains no asbestos.
- Exceeds requirements of ASTM D 4601, Type II.
SR Glass IV is a Type IV, fiberglass ply sheet. It can be used as a ply sheet in built-up or hybrid roof systems. It offers higher strength than typical Type IV fiberglass ply sheets and excellent application characteristics.
BENEFITS:
- Quality ply sheet.
- Ease of handling – provides for a contractor friendly application.
- Contains no asbestos.
- Meets or exceeds requirements of ASTM D 2178 for Type IV glass felts.
SR Glass VI is a high performance Type VI fiberglass ply sheet that provides consistently higher strength with superior handling and application characteristics. It can be used as a ply sheet in built-up roof system.
BENEFITS:
- Enhanced interply adhesion.
- High quality ply sheet.
- Ease of handling – provides for a contractor friendly application.
- Contains no asbestos.
- Meets or exceeds the requirements of ASTM D 2178 for Type VI glass felts.
- Classified by Underwriters Laboratories Inc.® as to external fire exposure only.
SR Superior Ply Ultra is a high performance, asphalt coated tri-laminated polyester/glass/polyester base sheet. SR Superior Ply Ultra is a continuous lay product that does not require cutting into short lengths during installation.
BENEFITS:
- Can be applied using conventional equipment.
- Compatible with hot and cold asphalt adhesive.
- Exceeds requirements of ASTM D 4601, Type II.
A tough smooth surface, 94 mils (2.4 mm) thick modified bitumen sheet. SRM Ply 60 is reinforced with a fiberglass mat coated with premium asphalt modified with styrene-butadiene-styrene (SBS) block copolymers. This blend of materials yields a membrane with very good waterproofing characteristics.
BENEFITS:
- May be applied by hot-mopping with asphalt adhesives.
- Weather-resistant for long-term performance.
- Very good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6163, Type I, Grade (S) requirements.
SRM PLY 90 TG is a fire-rated, 3.0 mm thick, fiberglass reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with a smooth top surface and a polypropylene burn-off film underside. This sheet is designed to be applied using torch welding methods. It is designed as an interply sheet or a base ply in a modified system.
BENEFITS:
- May be applied by hot-mopping with asphalt adhesives.
- Weather-resistant for long-term performance.
- Very good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6163, Type I, Grade (S) requirements.
SRM PLY Base is a smooth surfaced, premium SBS (StyreneButadiene-Styrene) mop or cold applied membrane. Manufactured with a non-woven polyester mat and a fiberglass strand for enhanced dimensional stability, high tear strength and puncture resistance. SRM PLY Base is saturated and coated with a premium quality, asphaltic bitumen and SBS elastomers for a highly durable, flexible and easily maintainable membrane. It is designed for use as a base or interplay sheet in modified bitumen and built-up roof systems.
BENEFITS:
- Applied by conventional methods.
- Weather-resistant.
- Good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6164, Type I, Grade (S) requirements.
SRM PLY FR GR TG SBS is a fire-rated, 4 mm thick, fiberglass reinforced, styrene-butadiene-styrene (SBS) modified bitumen sheet with a granule top surface and a polypropylene burn-off film underside. This sheet is designed to be applied using torch welding methods.
BENEFITS:
- May be applied by hot-mopping with asphalt adhesives.
- Weather-resistant for long-term performance.
- Very good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6163, Type I, Grade (G) requirements.
SRM PLY FR GR is a fire-resistant, granule surfaced, premium SBS (Styrene-Butadiene-Styrene) hot-mop or cold applied membrane. Manufactured with a heavy-duty, high-performance composite polyester/fiberglass scrim mat that is saturated and coated with a premium quality, asphaltic bitumen and SBS elastomers for a highly durable, flexible and easily maintainable membrane. It is designed for use as a cap sheet in modified bitumen and hybrid built-up roof systems.
BENEFITS:
- Excellent cold weather performance.
- Exceeds ASTM D 6162, Type II, Grade (G) requirements.
SRM PLY FR GR is a fire-resistant, granule surfaced, premium SBS (Styrene-Butadiene-Styrene) hot-mop or cold applied membrane. Manufactured with a heavy-duty, high-performance composite polyester/fiberglass scrim mat that is saturated and coated with a premium quality, asphaltic bitumen and SBS elastomers for a highly durable, flexible and easily maintainable membrane. It is designed for use as a cap sheet in modified bitumen and hybrid built-up roof systems.
BENEFITS:
- May be applied with either hot asphalt or cold process adhesive.
- Weather-resistant for long-term protection.
- Good cold weather performance.
- Uniform layers of protection provided by quality control during manufacture.
- Exceeds ASTM D 6163, Type I, Grade (G) requirements.
SRM Ply G4S is a high performance, fire-rated, 120 mils (3.0 mm) thick modified bitumen sheet with a smooth top surface. SRM Ply G4S is reinforced with fiberglass mat coated with premium asphalt modified with styrene-butadiene-styrene (SBS) block copolymers. This blend of materials yields a membrane with good low temperature flexibility, elongation and waterproofing characteristics.
BENEFITS:
- Weather-resistant for long-term performance.
- Good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6163, Type I, Grade (S) requirements.
WITE BRITE® REFLEX G4 HWLD SBS is a fire resistant, white reflective smooth surfaced, premium SBS (Styrene-Butadiene-Styrene) heat weld applied membrane. The surface consists of a factory applied white reflective laminate film as the weathering surface. The membrane is manufactured with a fiberglass mat that is saturated and coated with a premium quality, asphaltic bitumen and SBS elastomers for a durable, flexible and easily maintainable membrane. It is designed for use as a reflective cap sheet in modified bitumen and hybrid built-up roof systems.
BENEFITS:
- Weather-resistant for long-term performance.
- Good cold weather performance.
- Uniform layer of protection provided by quality control during manufacture.
- Exceeds ASTM D 6163, Type I, Grade (S) requirements.
|
|
